AK F 80-E
Type E
Cantilever Bracket AK F 80-E HCP
Group: A420
Galvanised hollow-box section with welded end plate serving as a cantilever arm
Can be used as a crossbar with End Support STA and Self Forming Screws FLS
Direct connection to cast-in channels possible via round holes in the base plate
Overview of Types
General Information
Galvanised hollow-box-section with welded end-plate to serve as cantilever arm. May be used as a crossbar when combined with End Support STA and 4 x Self Forming Screw FLS. By means of the round holes in the base plate a direct connection to excisting cast-in channels is possible.
Certification
CE mark (Declaration of performance see downloads)
ETA-24/0471
Technical specifications
Primary element material | steel |
Surface finish | HCP |
Corrosion protection class | C4 |
Load range
Type | -VX,perm. | VX,perm. | -VY,perm. | VY,perm. | VZ,perm. |
AK-E F 80- 600 HCP | 17,00 kN | 17,00 kN | 9,10 kN | 9,10 kN | 31,30 kN |
Type | -MX,perm. | MX,perm. | MY,perm. | -MZ,perm. | MZ,perm. |
AK-E F 80- 600 HCP | 2,1 kNm | 2,1 kNm | 2,2 kNm | 0,8 kNm | 0,8 kNm |
The specified load values are design loads Rd and include a partial safety factor γM2 = 1.25 (DIN EN 1993-1-8:2025-04, Table 4.1)
A partial safety factor of γG = 1.35 (DIN EN 1990:2021-10, Table A1.2(B)) must be taken into account for permanent loads.
Also available with DualShield for high corrosion protection within C5H environments.
Software
This product is available in the following software.
Installation
AK-E F 80: With 4 x Self Forming Screw FLS when fixed to another siFramo hollow-box-section. Alternatively with two suitable wall anchors through holes “A” when fixed directly to building structure.
AK-E F 80/30: With 2 x Self Forming Screw FLS when fixed to another siFramo hollow-box-section. Alternatively with two suitable wall anchors through holes “A” when fixed directly to building structure.
Configuration AK-E F 80: Plate welded to Beam section F 80
Configuration AK-E F 80/30: Plate welded to Beam section F 80/30