Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
WBD F 100 - T
WBD-P F 100 - 121/160
WBD-P F 100 - 161/200
WBD-P F 100 - 201/310
WBD F 100 - 80/120
WBD F 100/160 - 121/16
WBD F 100/160 - 161/200
WBD F 100/160 - 201/300
Group: A821
Plug-in component for creating a square end plate at the open end of Beam Section TP F 100 or Beam Bracket/Cantilever Bracket AK F 100
Variation 'T' with octagonal insert allows full utilisation of the beam section within the space required by the End Support WBD
Depending on the situation, different options are recommended:
Types F100:
a) Directly to building structure: 4 x suitable wall anchors and 4 Self Forming Screws FLS applied to the square/octagonal insert
b) To traditional steel beams between 80 – 310 mm flange dimensions: 1x Assembly Set 5P M12 S, M16 S and 4 Self Forming Screws FLS applied to the square/octagonal insert
c)To Sikla Simotec steel beams 100/120: with Bracket Plates FV 100/120 when positive mechanical connection required
The Beam Section TP F 100 connected to the End Support WBD F 100 has to be screwed with 4 Self Forming Screws FLS F. On each of the opposite sides 2 Self Forming Screws FLS F are necessary. The permissible distance between base plate WBD and profile must not exceed 30 mm.
Types 100/160
a) Directly to building structure: 4 x suitable wall anchors and 4 Self Forming Screws FLS applied to the square/octagonal insert.
b) To traditional steel beams between 80 – 300 mm flange dimensions: 1x Assembly Set 5P M12 S, M16 S and 4 Self Forming Screws FLS applied to the square/octagonal insert.
The Beam Section TP F 100/160 connected to the End Support WBD F 100/160 has to be screwed with 8 Self Forming Screws FLS F. On each of the broader sides 4 Self Forming Screws FLS F are necessary.
Base plate finish:
| Type | Base plate finish |
|---|---|
| WBD F 100-80/120 | flat |
| WBD-P F 100-121/160 | corrugated |
| WBD-P F 100-161/200 | corrugated |
| WBD-P F 100-201/310 | corrugated |
| WBD F 100-T | flat |
| WBD F 100/160-121/160 | flat |
| WBD F 100/160-161/200 | flat |
| WBD F 100/160-201/300 | flat |
Info | Type | Min. flange width | Weight | Quantity | Part number | |
| WBD-4KT 80/120-F100 HCP | 80.00 mm | 6.196 kg/pcs. | 1 pcs. | 113075 | ||
Plug-in component designed to create a square end plate at the open end of a Beam Section TP F100 or a Beam Bracket/Cantilever bracket AK F100. The "T" variation with octagonal insert allows full use of the beam section, permitting screwed connections anywhere along the length without internal screw clashes.
Certification
CE mark (Declaration of performance see downloads)
ETA-24/0471
Primary element material | steel |
Surface finish | HCP |
Corrosion protection class | C4 |
The specified load values are design loads Rd and include a partial safety factor γM2 = 1.25 (DIN EN 1993-1-8:2025-04, Table 4.1)
A partial safety factor of γG = 1.35 (DIN EN 1990:2021-10, Table A1.2(B)) must be taken into account for permanent loads.
Also available with DualShield for high corrosion protection within C5H environments.
Software
This product is available in the following software.
siFramo - ETA-24/0471
PDF (2.15 MB)