Bracing Arm SKO F100 HCP
Group: A823
Bracing arm for reinforcement of frames made from Beam Section TP F100 and/or Cantilever Bracket AK F100
Overview of Types
General Information
Bracing arm for reinforcement of frames made from Beam Section TP F100 and/or Cantilever Bracket AK F100.
Certification
CE mark (Declaration of performance see downloads)
ETA-24/0471
Technical specifications
Primary element material | steel |
Surface finish | HCP |
Corrosion protection class | C4 |
The specified load values are design loads Rd and include a partial safety factor γM2 = 1.25 (DIN EN 1993-1-8:2025-04, Table 4.1)
A partial safety factor of γG = 1.35 (DIN EN 1990:2021-10, Table A1.2(B)) must be taken into account for permanent loads.
Also available with DualShield for high corrosion protection within C5H environments.
Software
This product is available in the following software.
Installation
With 2x4 Self Forming Screw FLS when used inside a corner of two F100 size hollow-box sections.
With 4x Self Forming Screw FLS and 2x suitable wall anchors/fixings when used to connect between one F 100 size hollow-box section and the building structure.