STA F 100 - 80-E 45°
End Support STA-E F100-F 80 45° HCP
Group: A822
Part number 406002
End Support can be used as a support and stiffening element at 45°
Suitable for use with Beam Sections F 100
Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
STA F 100 - 80-E 45°
Group: A822
Part number 406002
End Support can be used as a support and stiffening element at 45°
Suitable for use with Beam Sections F 100
BP | 100 mm |
CP1 | 65 mm |
dP | 14 mm |
HG | 317.5 mm |
HP | 210 mm |
LG | 181 mm |
tP | 8 mm |
W | 45° |
The specified load values are design loads Rd and include a partial safety factor γM2 = 1.25 (DIN EN 1993-1-8:2025-04, Table 4.1)
A partial safety factor of γG = 1.35 (DIN EN 1990:2021-10, Table A1.2(B)) must be taken into account for permanent loads.
Primary element material | steel |
Surface finish | HCP |
Corrosion protection class | C4 |
Also available with DualShield for high corrosion protection within C5H environments.
Depending on the situation on site there are two options to use this product:
a) Connection within the siFramo system by connecting with 4 FLS screws to each beam section F80.
b) Connection to building fabric by using 2 suitable wall anchors in diagonal configuration.
Configuration: Base plate welded to Octagon F 80
Certification
CE mark (Declaration of performance see downloads)
ETA-24/0471
siFramo - ETA-24/0471
PDF (2.15 MB)