STA F100/160-Q
End Support STA-Q F100 HCP
Group: A822
Plug-in component designed to create an endplate at the open end of a Beam Section TP F 100/160
Overview of Types
General Information
Plug-in component designed to create an endplate at the open end of a Beam Section TP F 100/160.
Certification
CE mark (Declaration of performance see downloads)
ETA-24/0471
Technical specifications
Primary element material | steel |
Surface finish | HCP |
Corrosion protection class | C4 |
The specified load values are design loads Rd and include a partial safety factor γM2 = 1.25 (DIN EN 1993-1-8:2025-04, Table 4.1)
A partial safety factor of γG = 1.35 (DIN EN 1990:2021-10, Table A1.2(B)) must be taken into account for permanent loads.
Also available with DualShield for high corrosion protection within C5H environments.
Software
This product is available in the following software.
Installation
For the connection to Beam Section TP F 100/160 (flange side 160) 4 Self Forming Screws FLS F are necessary.
The Beam Section TP F 100/160 connected to the End Support STA F 160-Q has to be screwed with 8 Self Forming Screws FLS F. On each of the broader sides 4 Self Forming Screws FLS F are necessary. Fixing to walls and ceilings with suitable wall anchors M10.
Configuration: Base plate welded to Octagon F 100/160