GE F 80 - 80
Pivot Joint GE F 80 - 80 HCP
Group: A437
Bracing element for single-arm cantilevers with System siFramo 80 and for reinforcement of frame constructions
Angle continuously adjustable between 25° and 155°
Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
GE F 80 - 80
Group: A437
Bracing element for single-arm cantilevers with System siFramo 80 and for reinforcement of frame constructions
Angle continuously adjustable between 25° and 155°
Attachment of Joint GE F 80 to Beam Section TP F 80 by means of 4 Self Forming Screws FLS F at the base plate. The support profile TP F 80 plugged onto the octagon is also attached by means of 4 Self Forming Screws, so 8 Self Forming Screws are necessary in total.
After installation at the desired angle the screws have to be tightened with 40 Nm.
Angle: 25° - 155°
Info | Type | Weight | Quantity | Part number | |
| GE F 80-F 80 HCP | 2.12 kg/pcs. | 1 pcs. | 113835 | ||
Applicable as bracing element of single-arm cantilevers in conjunction with System siFramo 80 and for the reinforcement of frame constructions. The angle a is continuously variable between 25° and 155°.
Primary element material | steel |
Surface finish | HCP |
Corrosion protection class | C4 |
Type | -VX,perm. |
VX,perm. |
GE F 80-F 80 HCP | 13,70 kN | 13,70 kN |
The specified load values are design loads Rd and include a partial safety factor γM2 = 1.25 (DIN EN 1993-1-8:2025-04, Table 4.1)
A partial safety factor of γG = 1.35 (DIN EN 1990:2021-10, Table A1.2(B)) must be taken into account for permanent loads.
Also available with DualShield for high corrosion protection within C5H environments.
Software
This product is available in the following software.
Certification
