M12-25/125
Resin Anchor Rod VMZ-A 80 M12-50/150
Group: 1409
Part number 190784
Anchor rod for push-through and pre-positioned mounting in concrete tensile zones for heavy loads in M&E services and plant construction
Suitable for attaching pipelines, channels and brackets in closed rooms (except damp locations)
No special drill required, small edge and centre distance
Technical Data
Pre-assembled with washer and hexagon nut.
FRP 30 | 5,8 kN |
FRP 60 | 3,11 kN |
FRP 90 | 1,14 kN |
Technical specifications
Material base body | steel |
Class | 5.8 |
Surface | electro galvanized (Fe//Zn) |
Corossion class | C2 |
Certification
Sikla Approval ETA-15/0260
Installation
1. Drill hole according to min. setting depth vertically to the surface.
2. Careful cleaning of drill hole with Steel brush and Blow-Out Pump.
3. Screw Mixing Nozzle onto the cartridge; foreshots to be removed and fill 2/3 of drill hole with resin starting from botton of the hole.
4. Drive the anchor manually into plastered borehole up to its embedment mark.
5. When reaching the embedment mark, plaster must be apparent.
6. Respect hardening time, when tighten the anchor with instructed torque.
Detailed assembly instruction is attached to the product.
Documents
- Injection System VMZ - ETA 10/0260
PDF (6.64MB)
- Sikla Anchor Injection Systems
PDF (8.81MB)
- DoP - Injection System VMZ
PDF (8.42MB)