Speed Nut NT CC41-M10 A4
Group: 1714
Part number 199312
Assembly aid for vertical rails or hard-to-reach places – effectively replaces a ‘third hand’.
Can be used universally in all Stainless steel Sikla mounting rails with a rail width of 41 mm – regardless of the rail height.
Smooth movement and secure fastening – no snagging on screw heads, no settling after tightening.
Technical Data
Mi1 | M10 |
Channel Nut and Spring are tightely connected.
Load range
VX,perm. | 3,40 kN |
-VZ,perm. | 5,80 kN |
The permissible load capacities of the channels are to be respected.
Technical specifications
Primary element material | Stainless Steel A4 |
Connecting element material | Spring steel, stainless |
Corrosion protection class | CRC II – III (C4 – C5 acc. to DIN EN ISO 12944-2) |
Certification
Installation
After inserting the Speed Nut into the channel opening, it is - by exerting slight pressure on it - turned to the right as far as it will go; deinstallation may be effected by following the instructions in reverse order.
Installation and deinstallation do not require tools and may be repeated several times.
| M6 | M8 | M10 | |
|---|---|---|---|
| Tightening torque [Nm] | 10 | 25 | 40 |