Go to your local Sikla page and discover offers for your country or sales region:

Country

Choose your country

Go to your local Sikla page and discover offers for your country or sales region:

Country

U Bolt RUB 46 26,9MM (3/4'') HCP

Group: B112

Part number 805054

U Bolt RUB 46 for fastening pipes in utility systems to Profile PRO 46

Used as a fixed point or as a guide for horizontal and vertical pipes

Technical Data

CAD

D	24.8 mm
D₂	24.8 mm
e	45 mm
H	101.2 mm
H₂	73 mm
H₃	89.8 mm
M_a	M8
SW	13 mm

Completely pre-assembled as a set, consisting of:
2 x Profile Clip MPK 46
2 x nuts on each side
1 x U Bolt with sheath (for electro-chemical separation)
1 x Slide Support GA 41-46 (enclosed)

Load range

-V_X,perm.	1,07 kN
V_X,perm.	1,07 kN
-V_Y,perm.	1,04 kN
V_Y,perm.	1,04 kN
-V_Z,perm.	5,42 kN
V_Z,perm.

Technical specifications

Halogen-free	Yes
UV-resistant	Yes

Primary element material	steel
Isolating element material	PA 6.0
Surface finish	HCP

Installation

When used as a guide bearing, nuts arranged on both sides at the top and bottom of the round steel bracket must be tightened. The pipe should remain freely movable.
When used as a fixed point, first tighten the lower nuts until the pipe is clamped. Then tighten the upper nuts. For fixed points, the permissible forces of the structural connection and the bending loads of the U Bolt must not be exceeded.

Corrosion protection class