Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
Group: 1423
Part number 419036
Anchor for push-through mounting in concrete tensile zones for M&E services and plant construction
High permissible loads with close edge and centre distances, suitable for cracked and non-cracked concrete under seismic loads of Categories C1 and C2
Simple and quick installation with matching drill diameter and drive-in hammer zone to protect threads
Bolt Anchor AN BZ3 - ETA-20/0611
PDF (3.12 MB)
DoP - Bolt Anchor AN BZ3
PDF (1,022 KB)
Supplied with washer and hexagon nut.
Primary element material | steel |
Surface finish | electro galvanized (Fe//Zn) |
Corrosion protection class | C2 |
1. Drill bore hole according to the minimum bore hole depth perpendicularly to the surface.
2. Remove dirt from hole.
3. Drive the anchor into concrete up to its embedment mark.
4. Immediately resilient after tightening with the torque wrench T(inst) indicated in the table below. Advices of the mounting instruction are to be respected!
Certification
Sikla Approval ETA-20/0611
VdS compliant for all sizes