Speed Nut NT CC41-M10 HCP
Group: 1814
Part number 186284
Particularly useful for installation in vertical channels or where access is difficult
Can be used in all Sikla Channels of 27 mm width, independent of the channel's height
HCP coating meets special corrosion protection requirements
Technical Data
Mi1 | M10 |
Channel Nut and Spring are tightely connected.
Load range
VX,perm. | 3,40 kN |
-VZ,perm. | 5,80 kN |
The permissible load capacities of the channels are to be respected.
Technical specifications
Material base body | steel |
Material connecting element | Spring steel, stainless |
Class | 5.6 |
Surface | HCP |
Corossion class | C4 |
Certification
Installation
After inserting the Speed Nut into the channel opening, it is turned to the right as far as it will go by exerting slight pressure on it; deinstallation may be effected by following the instructions on the reverse order.
Installation and deinstallation do not require tools and may be repeated several times.
| M6 | M8 | M10 | M12 | |
|---|---|---|---|---|
| Tightening torque 8.8 [Nm] | 10 | 25 | 40 | 80 |
Using lower steel classes, the value are to be reduced accordingly.