Product catalogue

The Cross support CFB is a shear force stabilizer for Sikla Cantilever Brackets 41. The Cross Support intakes shear forces specially the force caused due to length expansion on piping with warm applications. Using the Cross Support CFB can increase the capability of handling higher shear forces.

The Cross support CFB is a shear force stabilizer for Sikla Cantilever Brackets 41. The Cross Support intakes shear forces specially the force caused due to length expansion on piping with warm applications. Using the Cross Support CFB can increase the capability of handling higher shear forces.

One-piece pipe clamp with 2-thread nut with M8 or M10 connection option for fastening pipes in supply systems. Suitable for wall, floor and ceiling mounting as well as for sound-decoupled pipe fastening, even for sound insulation requirements in accordance with DIN 4109. Time savings thanks to quick-release fastener. Thread stop prevents the connection nut from chipping off if not installed correctly.

For connecting the Stabil D-A pipe clamp via its clamp tabs and for adjusting threaded rods.

Suitable for the Sikla Threaded Tubes and thread connectors (such as mounted in Slide Sets).

Suitable for the Sikla Threaded Tubes stainless steel and thread connectors (such as mounted on Slide Sets).

Suitable for Sikla Threaded Tubes and terminal nuts (e.g. with Slide Sets), especially to lock a nut.

The magnetic tool attachment ensures that drill bits or screws do not fall down while working.

For extending the static mixer for greater drilling depths.

Resin for Resin Anchor Rod VMZ-A. Excellent load capacity in broken and unbroken concrete. The resin mixture hardens resulting in strong bond with the concrete and a perfectly formed expansion sleeve around the conical rod. The inner bond between the conical rod and the resin mixture is broken by applying a torque moment after the hardening process. The VMZ is approved for use under seismic action according to the performance category C1 and C2 (M10 - M16).

The Sikla Injection System VMH is a universal chemical fastening for use in uncoated FD/FDE concrete surfaces in LAU systems. The Resin Anchor Rod VMU-A A4 is used for anchoring in WHG surfaces. It can also be used for cracked and non-cracked concrete for anchoring the highest loads. The Resin Anchor Rod VMU-A or a commercially available threaded rod with proof of strength (acceptance certificate 3.1) is used as an anchoring element for this purpose. By means of the dispenser gun the components are injected through the mixer nozzle into the drill hole or with perforated brick into the perforated sleeve. This ensures that the anchoring element is securely anchored to the substrate. The VMH enables fastenings that are repeatedly exposed to high temperatures (+160°C) thanks to high short-term temperatures. The VMH is approved for use under seismic action according to the performance categories C1 and C2.

Assembly of sloped supports for Fixed Points. With the beveled Universal Joint UG FP, the sloped supports could be mounted directly to the Fixed Point Clamp.

Pre-assembled supports kits for Fixed Points. With the beveled Universal Joint UG FP, the sloped supports can be mounted directly to the Fixed Point Clamp.

For wall, ceiling and floor installation of mounting elements in M&E services.

Adapter plate for installing pipe clamps to Beam Section TP F80 or Channel System by means of threaded tube 1/2'.

Interface component to connect threaded bar M10 to M16 and threaded tube 1/2' siFramo TP F80 beam sections. The ST versions are solid and are only intended for pipe clamp fastening using threaded pipes.

Interface component to connect threaded bar M10 to M16 and threaded tube 1/2' siFramo TP F100 beam sections. The ST versions are solid and are only intended for pipe clamp fastening using threaded pipes.

For wall, ceiling and floor installation for mounting elements in M&E services.

Element for fixation to wall, ceiling and floor for installations in M&E services.

Attachment component to connect Beam Section TP F 100 or Channel MS.

Connecting element for Sikla Stabil D-3G Pipe Clamps larger than 31 mm (with sound absorption lining larger than 24 mm) and Stabil D-A up to 303 mm for suspending pipe clamps underneath one another.

Suitable for the quick and easy mounting of components to a concrete soffit or shear wall. The internal dual thread M8/M10 allows for a direct easy connection with the Nail Anchor (e.g. M&E service supports). The reduced drilling depth of 35 mm and the bore dia. of 6 mm minimise the risk of hitting a rebar during installation and reduces the overall cost of drilling.

Suitable for push-through mounting solutions for quick and safe fixation to concrete ceilings or walls in closed rooms - not suitable for damp locations. Easy drilling (6 mm only ) and simple impact mounting.