Product catalogue
24 out of 575 results
Filters
24 out of 575 results
Ducting Clamp PLU 2G-N
20 Variants
Two-piece pipe clamp for simple installation of spiral-seam ducts.
Ducting Clamp PLU 2G-N ME
20 Variants
Two-piece pipe clamp for simple installation of spiral-seam ducts. Suitable for soundproof installation according to DIN 4109.
Ducting Clamp PLU ME
9 Variants
Designed for installing spiral-seam ducts for industrial ventilation systems (according to DIN 24145). For soundproof installation of pipes (according to DIN 4109).
Ducting Clamp PLU TOP 2G ME
20 Variants
Two-piece pipe clamp for simple installation of spiral-seam ducts. Suitable for soundproof installation according to DIN 4109.
Ducting Strap LUB
1 Variant
For quick and safe soundproof mounting of ducts either close to a ceiling, or for suspended installation when using a threaded rod. The bending points are punched, ensuring easy and exact adjustment to the pipe diameter. Suitable if soundproof installation according to DIN 4109 is demanded.
Duo Clamp SRS 2G
21 Variants
Two-piece pipe clamp with double thread connection (M8/M10) for the installation of pipelines.
Duo Clamp SRS 2G mE
21 Variants
Two-piece pipe clamp with double thread connection (M8/M10) and sound absorption lining for the installation of pipelines. Applicable for sound-absorbed installations according to DIN 4109 specifications.
Duo Clamp SRS A4
14 Variants
Two-piece clamp with thread connection M8 or M10 for the installation of pipelines.
Duo Clamp SRS ME A4
17 Variants
Two-piece pipe clamp with thread connection M8 or M10 and sound absorption lining for the installation of pipelines.
End Cap ADK 100
1 Variant
End Cap for clean finish at the ends of TKO 100, QKO 100 and other components based on a HEA 100 steel beam.
End Cap ADK 120
1 Variant
End Cap for clean finish at the ends of TKO 120, QKO 120 and other components based on a HEA 120 steel beam.
End Cap ADK 27
4 Variants
End Cap for clean finish at the end of Sikla Channel MS 27.
End Cap ADK 41
8 Variants
End Cap for clean finish at the end of Sikla Channel MS. Double channels require 2 End Caps.
End Cap ADK 46
1 Variant
To be used for safely and neatly covering the ends of Profiles PRO 46.
End Cap ADK F 80
2 Variants
End Cap for a clean finish at the ends of the F 80 or 80/30beam sections, AKs and TKOs.
End Cap ADK F100
2 Variants
End Cap for a clean finish at the ends of the F 100 or 100/160 beam sections, AKs and TKOs.
End Cap ADK WK 300-550
1 Variant
End Cap for clean finish at the end of Support Brackets WK 300/200 and 550/350.
End Support STA 100 HCP
1 Variant
In connection with Beam Bracket TKO 100, the End Support STA 100 enables the construction of crossbars, as well as further conjuctions between building structure and steel construction. By means of the slotted holes a simple compensation of structural deviations is possible up to 50 mm.
End Support STA 120 HCP
1 Variant
In combination with Beam Bracket TKO 120, the End Support enables the construction of crossbars, as well as further conjuctions between building structure and steel construction. By means of oblong holes a simple compensation of structural deviations is possible up to 50 mm.
End Support STA F 80 HCP
2 Variants
Plug-in component designed to create an endplate at the open end of a Beam Section TP F80 or a Cantilever bracket AK F80. By means of the round holes in the base plate a direct connection to excisting cast-in channels is possible.
End Support STA F100 HCP
3 Variants
Plug-in component designed to create an endplate at the open end of a Beam Section TP F 100 or a Cantilever bracket AK F 100. Variation types F 100-80 (E) are designed to combine F 100 with F 80 beam sections. Octagonal insert allows full utilisation of beam section within the space required by the End Support STA itself.
End Support STA-E F 80 45° HCP
1 Variant
The End Support STA F80-E 45° is designed to generate a 45° bracing element in combination with F80 beam sections or F80 Cantilever Brackets.
End Support STA-E F 80-E HCP
2 Variants
Plug-in component designed to create an endplate at the open end of a Beam Section TP F80 or a Cantilever bracket AK F80. By means of the round holes in the base plate a direct connection to excisting cast-in channels is possible.
End Support STA-E F100 -F 80 45° HCP
1 Variant
The End Support STA F 100-80-E 45° is designed to generate a 45° bracing element in combination with F100 Beam Sections or F100 Cantilever Brackets.