DN 15 - 50: Position the preassembled clamping hooks onto the beam flange and tighten the nuts (to 10 Nm). For beam width < 100mm both nuts of the PA bearing block in the middle have to be removed. Fasten U-bolt to U-Bolt fixing plate (to 30 Nm). The pipe is pressed against the PA bearing blocks by the clamping action of the U-bolt thus ensuring a fixed position of the pipe.
DN 65 - 300: Position the preassembled clamping hooks onto the beam flange and tighten the nuts (to 10 Nm). For beam width < 100mm the 4 nuts of the PA bearing block have to be removed. Fasten U-bolt to the clamping hooks with the nuts included (to 50 Nm). The pipe is pressed against the PA bearing block.
Selection guide:
Type
for flange width [mm]
80/120
80 - 120
140/160
121 - 160
180/220
161 - 220
240/260
221 - 260
280/300
261 - 300
General Information
Fixed Point for attachment of steel or stainless steel pipes of DN 15 up to DN 300 on steel beams with width of 80 up to 300 mm and max. flange thickness of 20 mm. From DN 65 onwards, the design of the assembly changes.
Certification
Technical specifications
Max. temperature
130 °C
Min. temperature
-20 °C
Halogen-free
Yes
Primary element material
steel
Isolating element material
PA
Sliding element material
PA GF
Surface finish
HCP
Corrosion protection class
C4
The following types are available from stock: H 20 DN 25 - 80/120 and H 20 DN 50 - 80/120.
Software
This product is available in the following software.
